User Guide

16
OPTIONS
Handholds with arm
troughs:
Refer to Figure 17 & 18
1. Mounting: Hand holds
with arm troughs are
mounted off the back of
the sit bar (3). It is easiest
to mount with the sitbar
removed from the
column.
2. Width: The width is adjusted by removing the ball lock
pins (1) on the cross bar and sliding the tubes inwards or
outwards.
3. Height: The height can be adjusted by loosening the
clamps (2) and moving the hand hold posts up or down.
Tighten the clamp again when adjusted to fit.
4. Reattach the sitbar
(figure 18).
Figure 17
1
2
Figure 18
3