User Guide

7
Step C: Insert the Upper Column
Refer to figure 8
1. Remove the allen screw from the bottom
part of the upper column.
2. Slide the upper column down into the main
column.
3. Line up the holes in the upper and main
columns (1), and tighten the adjustment
lever to secure.
4. Insert the allen screw
(1) and tighten.
Step D: Attaching the Knee Blocks
and Foot Supports
Refer to figure 9.
1. Slide the Knee Blocks into their
respective brackets and secure with
the adjustment levers. The vertical
adjustment levers should be facing
outward.
2. Slide the foot supports onto the
bottom of the column, and secure
by tightening the two allen screws
(1).
1
Figure 8
Figure 9
2
1