User Guide

6
Figure 7
C2
C1
Step A: Prepare for Assembly
Refer to figure 5.
Lay the components out on the floor.
You should have received the following
for a basic system:
1. Base
2. Upper Column
3. Tray
4. Two Knee Supports
5. Foot Support
Step B: Assembly the Base
Refer to figures 6 & 7.
1. Pull up on the main column until the
tilt mechanism slides in between the
black markings.
2. Tighten the two allen screws that
secure the tilt bar to the main
column.
3. Swing the legs away from each other
until they lock into place.
Note: The main column is correctly
aligned if it is vertical when the base is
standing on the floor.
Figure 5
Figure 6
Figure 7