User Guide
19
Adjustments:
Refer to figure 30.
1. Neckrest assembly height:
a)
Loosen the two allen screws (figure 29.1).
b)
Slide the neckrest bar clamps along the
main column to the desired height.
c)
Tighten the screws.
2.
Neckrest assembly depth:
a)
Adjustment lever (2), located at the
bottom of the neckrest post.
b)
Slide the neckrest support to the desired
location.
c)
Tighten the adjustment lever.
3.
Height of the neckrest:
a)
Loosen the two allen screws (3), on the
side of the ear clamp.
b)
Slide the neckrest along the hex bar (4) to
the desired height.
c)
Tighten the screws.
4. Depth of the neckrest:
a)
Loosen the two allen screws (3).
b)
Slide the neckrest ears (5) back/forth to the desired depth.
c)
Tighten the screws.
5. The neckrest support system can be moved out of the way while
placing the child in or removing the child from the stander. Loosen
adjustment lever (2) and slide the neckrest support out of the way.
Reverse procedure to return post to vertical position.
Figure 30
3
4
5
2