User Guide

16
OPTIONAL CONFIGURATIONS
Always remove the child from the stander before alterations are made.
Supine Stander
Convert to supine :
1. Replace the sternum pad with the
supine neckrest assembly (refer to
figures 23- 25):
a) Loosen the adjustment lever
(1). Slide the sternum pad
assembly off the upper
column.
b) Attach the supine neckrest by
sliding the track stud (2) into
the front track of the upper
column.
c) Tighten the adjustment lever
(3), on the neckrest assembly,
to secure the neckrest. The
track stud must be completely within the front track.
d) Adjust the height of the neckrest: Loosen the adjustment lever (3).
Slide the assembly along the upper column to the desired height.
Tighten the lever.
e) Adjust the depth of the neckrest: Loosen the two allen screws (4).
Slide the neckrest back/forth to the desired depth. Tighten both
Figure 25
3
4
Figure 23
1
Figure 24
2
Figure 22