User Guide

11
height adjustment), and adjust the width. Tighten firmly. Repeat for the
hip support.
6. Pitch: remove the ball lock pin (E) on the trigger tilt by pushing in on
the black button as you pull out. Squeeze the trigger to adjust the pitch
of your column. Replace the ball lock pin!
7. Adjust the knee block angle.
8. Adjust the angle of the foot supports. Remember that if the hips and
knees are flexed to 10 degrees, the foot supports must be plantarflexed
10 degrees to give neutral alignment at the ankles. This is very
important for children with limited range.
Figure 11