User Guide

17
the column.)
d) With the child in the stander, slide the mounting
column (B) onto the horizontal tube (A) close to the
child and reinsert the push pin.
e) Adjust the depth of the neckrest by releasing the two
allen screws that attach it to the vertical mounting bar.
f) Adjust the depth of the shoulder pads:
1) Loosen the front retainer
ring (D) to allow
adjustment.
2) Loosen the rear index
clamp (E) and move the
shoulder pads in place to
provide the appropriate
amount of anterior
support.
3) Tighten the index clamp
(E), making sure that it is
aligned so that the
shoulder pad will lock in
two positions: set and
out- of - the - way.
4) Tighten the inner retainer
ring (D) to provide
enough tension to allow
the pivot to lock into
place.
A
B
C
D
E