User Guide

PRONE STANDER OPTIONS:

Prone Neckrest and/or Shoulder Pads:

Assembly:

Mark the position of the foot and knee supports and

then remove them from the main column. To remove

the foot supports, first remove the column from the

base. To do this, unscrew the two screws on the base

bracket that hold the bottom of the man column, and

gently pull them apart. Then pull out the push pin and

slide the foot support off the column. To remove the

knee supports, do the same, as well as loosen the two

allen screws securing it in place.

Slide the mounting support tube (A) into place, with

the tube sticking out backwards between where the

knee blocks go.

Reattach the knee and foot supports to their original

positions. Then replace the main column into the

bracket on the base, and secure it in place by

tightening down the two screws.

Attach the remaining segments to the mounting tube

Measure the height to the top of the child s shoulders

and then to the mid ear.

Adjust the height of the shoulder pads to the height of

the top of the shoulders, and the middle of the neckrest

to the mid

ear height, using the foot supports as the

baseline.

Fitting:

Remove the mounting by pulling out the push pin (C).

Place the child into the stander (follow the

instructions).

Release the shoulder pad pivots by pulling the ring

back to release and swing open (pointing away from