User Guide

7
5. Attach the upper end of the gas strut to the receiver
mounting (fig 7a) on the main column. Then attach the
lower (and thinner) end of the black gas strut to the black
plate between the cross bars (fig 7b). Tighten these bolts
well.
6. The tray mounting tubes (fig 8a) should be loosened off
just enough to let them swivel on the frame and brought
through 180 degrees to point upwards (fig 9a). Retighten
the screws.
Figure 7
a
b
Figure 8
Figure 9
a
a