User Guide

5
SUPINE ASSEMBLY INSTRUCTIONS:
1. Attach the column pivot
into the blocks (a) on the
top of the side frames.
Make sure the strut
receiver (b) is facing the
towards the trigger (c)
when it is above the
pivot.
2. Tighten the four bolts on the
top of each side, and make sure
the block is situated so the pivot
bar is below the frame.
3. Attach the frame
brace to the two side
frames, using the
lower set of holes.
Make sure the bar
with the stickers is
on top.
a
b
c