User Guide

7. Finally add all the hardware. The slings (fig 10A) will

simply slide into the sling holding clamps or the intact sling

units can be slid on to the main column and secured with

push pins. The chest support (B) drops down into the

column and is secured with a push pin, if it isn t already

attached to the upper sling. The knee blocks (C) slide into

their adjustment clamps on the knee bar, the short cross bar

below the pivot bar on the main column. The shoe holders

(D) can slide up on to the bottom of the column and secured

with a push pin. Lastly, the tray (E) drops into its mounting

tubes.

Figure 10