User Guide

17
close to the child and reinsert the push pin.
e) Adjust the depth of the neckrest by releasing the two
allen screws that attach it to the vertical mounting bar.
f) Adjust the depth of the shoulder pads:
1) Loosen the front retainer ring (fig. 14D) to allow
adjustment.
2) Loosen the rear index clamp (fig. 14E) and move
the shoulder pads in place to provide the
appropriate amount of anterior support.
3) Tighten the index clamp (fig.
14E), making sure that it is
aligned so that the shoulder pad
will lock in two positions: set
and out - of - the - way.
4) Tighten the
inner retainer ring (fig. 14D) to
provide enough tension to allow
the pivot to lock into place.
Figure 15
A
Figure 14
B
C
D
E