User Guide

8
Figure 7
C2
C1
Step C: Attach the Frame Brace to the Side Frames
Refer to figure 7.
1. Remove the hex head
screws (1) and the
washers from the ends of
the frame brace.
2. Position the frame brace
between the side frames
so the side frames fit
within the curve of the
end fittings and the holes
align.
3. Insert a screw with a
washer through the aligned holes of the
side frame and frame brace. Tighten secure
the frame brace, ensure the side frame is
seated snuggly within the end fitting.
Repeat for both sides.
4. Straighten the frame (if necessary) then tighten the two adjustment
levers (1 Fig 6.) on the top of the frame supports.
Step D: Attaching the Knee Blocks and Foot Supports
Refer to figure 8.
1. Slide the Knee Blocks into their
respective brackets and secure
with the adjustment levers.
2. Slide the foot supports onto the
bottom of the column, and secure
by tightening the two allen
screws.
Step E: Attaching the Upper Column
Figure 7
Figure 8