User Guide

25
on the bottom of the pivot pin receiver. Slide the receiver along the hex
bar (12) to the desired width. Tighten the set screw. Repeat for both
sides.
4. Pivoting the shoulder pads: The shoulder pads can be released and
pivoted out of the way while placing the child in or removing the child
from the stander. Pull the ring on the back of the plunger pin to release
the pivot. To open, rotate the shoulder pad away from the column until
the pivot locks. Repeat for both sides. To replace, pull the ring and
rotate the shoulder pad in the opposite direction until the pivot locks.
Figure 33
7
10
5
3
8
11
6
12