User Guide

23
Adjustments:
Refer to figure 31.
1. Neckrest Assembly height:
Loosen the two allen screws
(figure 30.1). Slide the neckrest
bar clamps along the main
column to the desired height.
Tighten the screws.
2. Neckrest Assembly depth:
Adjustment lever (2), located at
the bottom of the neckrest post.
Slide the neckrest support to the
desired location. Tighten the
adjustment lever.
3. Height of the neckrest: Loosen
the two allen screws (3), on the
side of the ear clamp. Slide the
neckrest along the hex bar (4) to
the desired height. Tighten the
screws.
4. Depth of the neckrest: Loosen
the two allen screws (3). Slide
the neckrest ears (5) back/forth
to the desired depth. Tighten the
screws.
5. The neckrest support system can
be moved out of the way while
placing the child in or removing
the child from the stander. Loosen adjustment lever (2) and slide the
neckrest support out of the way. Reverse procedure to return post to
vertical position.
2
3
4
5
Figure 31