User Guide

20
Figure 25
Figure 24
3
4
Supine Stander:
Convert OMNI
TM
into Supine Stander
1. Replace the sternum pad with the supine
neckrest assembly (refer to figures 23 - 25):
a) Loosen the adjustment lever (1). Slide the
sternum pad assembly off the upper
column.
b) Attach the supine neckrest by sliding the
track stud (2) into the front track of the
upper column.
c) Tighten the adjustment lever (3), on the
neckrest assembly, to secure the neckrest.
The track stud must be completely
within the front track.
d) Adjust the height of the neckrest: Loosen
the adjustment lever (3). Slide the
assembly along the upper column to the
desired height. Tighten the lever.
e) Adjust the depth of the neckrest: Loosen
the two allen screws (4). Slide the neckrest
back/forth to the desired depth. Tighten
both screws.
Figure 23
1
2
Figure 22