User Guide

10
the wheel plate. Do not tighten completely.
6. Attach the lower edge of the wheel plate with two 1 allen screws.
Insert a washer through each of the screws between the screw head and
the wheel plate. Insert a set of four washers through each of the screws
between the wheel plate and the frame support.
7. Tighten all of the allen screws.
8. Repeat for both the left and right side frames.
9. Depress the button in the center of the quick release axle while sliding
the axle onto the frame support through the axle socket. Repeat for
both drive wheels.
10. Gently pull on the drive wheels to ensure they are locked in place.
Step G: Attaching the tray
Refer to figure 12.
1. Release the handles (1)
on the ends of the tray
mounting bar.
2. Place the tray
assembly on the tray
mounting bar so the
teeth on the angle
locks (2) mesh and the
washers lie between
the cams and the angle
locks.
3. Lock the cams to
secure the tray by turning the handles (1) clockwise until tight.
1
2
Figure 12