User Guide

7
ASSEMBLY
General Information
Tools Required
3/16 Allen Wrench (included in tool pouch)
5/32 Allen Wrench (included in tool pouch)
Tape Measure
Sliding Knobs
The sliding knobs are found on the thoracic ring support,
and the rear seat pad. These knobs slide along the length
of the tube, and automatically lock into place. Push the
round black knob along the length of the tube and away
from the hinge joint. Rotate the hinge joint outward and
release the knob. Refer to Figure 2.
To lock the knobs back in
place: swing the arm containing
the knob to its locked position.
The knob will automatically lock
into place.
Figure 2