User Guide

39
Remove the center vertical column to
reduce height:
This will basically disassemble the
unit to look very similar to Figure 5.
Take off the end cap on the bottom of
the central vertical frame (Figure 66).
The end cap may fit snugly, and could
take some effort to get off.
Loosen the socket screws on the seat frame, and slide the
seat frame down off of the center column (Figure 67).
Loosen the socket screws on the silver frame, and slide the
center column up and out (Figure 68). The seat frame may
be slid back onto the center vertical column and locked
into place if desired. Put the end cap back on the column
or in a safe place so it is not lost.
If desired, the caster legs may be collapsed as well, and
done so in the same manner as described on page 37.
Figure 66
Figure 67
Figure 68