User Guide

25
Lock both of the rear wheel breaks by pressing down and
slightly in on the two brake levers (Figure 28). The brake
handle will self - lock.
If the rear caster swivel lock is desired, use the pull knob
on the back of the caster to lock them in place. Align the
retaining pin with the deeper slot (Figure 29). Make sure
the swivel is locked! Rotate the caster until the pull knob
pin mates with the hole on the caster fork.
Note: The caster swivel locks cannot be adjusted by the
user once they are in the unit!
Figure 28
Figure 29
Locked
Unlocked