User Guide

16
Position 1, the handle lays toward the left of the unit. It
can rotate, but does not actuate the gas spring (Figure 16a).
Position 2, the handle is in a vertical locked position. It
cannot rotate, and does not actuate the gas spring (Figure
16b). Position 3, the handle is in a vertical un - locked
position. It can rotate, and will actuate the gas spring when
rotated toward the right of the right of the unit (Figure
16c).
Positions 1 & 2 are to be used help prevent accidental
actuation of the gas spring by the user. Position 3 allows
the handle to actuate the gas spring without having to use
the locking pull pin (Figure 15).
To actuate the gas spring (raise the upper frame), rotate
the handle to the right of the unit (Figure 16c). The further
the handle is rotated, the faster the spring will raise the
frame. The handle can be released at any time, and this
will lock the position of the upper frame in its current
location (The upper frame can still move up/down due to
the coil spring).
Movable with
activation
Figure 16c
Movable w/out
actuation
Figure 16a
Fixed vertically
Figure 16b