User Guide

14
Attach the seat to the center
vertical column. Slide the open
square tube attached to the seat
frame up around the center vertical
column. Make sure the nuts
attached to the allen screws are
aligned so they can slide into the
groove of the center column. Stop
when about a 1/2 inch (1.5 cm) of
the column extends below the
square tube. Firmly tighten the
allen screws until the seat is
securely in place.
Attach the end cap of the center
column. Push the cap into place until it
cannot go any further.
FITTING INSTRUCTIONS
Measuring The User
#1: Inseam + 2in: ________
#2: Crotch to Tip of the Sternum* - 2in: ________
#3: Chest Width + 1in: ________
#4: Chest Depth + 2.5in: ________
*This measurement can be changed for the most
effective area of the sternum pad placement; either,
below, across, or above the breast area.
Figure 14
Figure 13