User Guide

Unwrap the two black straps that keep the caster legs

together, and rotate the legs to an open position as shown

in Figure 1. The caster legs do not automatically lock into

place. Put away the straps by wrapping them around the

leg and looping the strap through the two D-rings.

Lock the caster legs in place. Rotate the rear leg pull

knobs so the retaining pin is aligned with the deepest slot.

Release the knob. It is ok if the knob does not slide all the

way into the slot. Rotate the caster leg back and fourth

until the retaining pin locks the leg in place. Refer to

Figure 6, note that the location of the slots may not be as

depicted as in the figure.

The front caster legs have two locking pins each. One to

lock the leg at a 10

degree angle, and the other to lock the

leg at an 18

degree angle. It is suggested to start with the

front legs at the 18

degree outward angle for first time

users, for use on outside/uneven terrain, or individuals

requiring added stability.

Figure 6

18-

Deg. Knob

10-

Deg. Knob

Rear Knob

Locked

Unlocked