User Guide

Pull upwards on the black knob
so that the bar is freed from its
resting position, swivel armrest
round and re-locate in either one
of the notches. Make sure both
sides are in same position other
wise the tray and arm rests will
not be parrallel.
To prepare the armrests for tray mount-
ing, you need to push in the metal nip-
ple this enables the armrest to tele-
scope, re-locate the nipple
in the hole at the end of
the rest.
The tray can be located in any of the
holes along the telescoping tube, this is
done by pulling out the ring pulls on
either side of the tray and just setting it
on the tubes releasing the pins allows
the tray to lock into the desired holes.
To hide away armrest just do above in reverse order.
MULHOLLAND POSITIONING SYSTEMS