ACROBAT INSTRUC- INSTRUCTION MANUAL
MULHOLLAND POSITIONING SYSTEMS INTRODUCTION 1 8 2 7 3 6 4 5 1 2 3 4 5 6 7 8 - Removable Tray - Removable back - Removable Seat - Angle Adjustable, swing-away foot-rests - Quick Release wheel - Telescoping Tray Supports - Folding Back Cane - Chair Tilting Lever
ACROBAT INSTRUCTION MANUAL CONTENTS 9 10 13 11 12 9 - Seat Back Hooks 10 - Back Release Cord 11 - Folding Mechanism 12 - Swing-Away anti-tippers 13 - Back reflex tension springs
MULHOLLAND POSITIONING SYSTEMS CONTENTS OF THE BOX Folded Acrobat frame Wheels attached Detached Swing-Away Foot Plate Detached Seat Insert Detached Back Insert Detached Tray (optional) 1 ASSEMBLY INSTRUCTIONS Remove entire contents from shipping box, insuring that you have all the contents listed above. A Grab each wheel and pull outwards, now grab each folding mechanism squeezing them and locate them into position.
ACROBAT INSTRUCTION MANUAL Now that the frame is assembled the seat and back inserts can now be put on, this makes the frame more rigid. C Find the location hooks on the base of the seat these need to be hooked around the hexagonal pegs found on each seat cane . The front end is located first then the back, and its locked into place by pulling the metal cable down , the seat should then locate into the location pegs.
MULHOLLAND POSITIONING SYSTEMS Pull upwards on the black knob so that the bar is freed from its resting position, swivel armrest round and re-locate in either one of the notches. Make sure both sides are in same position other wise the tray and arm rests will not be parrallel. To prepare the armrests for tray mounting, you need to push in the metal nipple this enables the armrest to telescope, re-locate the nipple in the hole at the end of the rest.
ACROBAT INSTRUCTION MANUAL To enbable the trunk pad to swing away pull out on the ring pull and pull pad towards you, push the pad back to lock into place. To engage the wheel brake, push lever away from you. once the brake clicks into position the wheel is locked. to release the brake, pull the lever towards you. To enable the chair to tilt to a max. 35 degrees, you need to pull up on the trigger release on the push handles.
MULHOLLAND POSITIONING SYSTEMS To disengage the flip down abductor pull the ring pull, this moves a locking pin which allows the abductor to flip down. Allows easy access for the user to the seat. Once user is sitting flip up the abductor until it clicks into position. The thoracic pad is swing-away. Simply pull outwards on the ring pull and the Pad can be swung either way. Again this feature can be used for when fitting or removing the user.
ACROBAT INSTRUCTION MANUAL This needs to be done with the seat insert removed. To make the seat width wider you need to unscrew the allen screw and Hook Nut. Take the allen screw out completely, this allows the inner tube to extend and therefore widening the seat area. (For wider seat inserts call customer service at Mulholland) By turning the Screw head clockwise you are compressing the spring which then sets the compressiveness of the back insert and canes when the user jerks. (ie.
MULHOLLAND POSITIONING SYSTEMS
ACROBAT INSTRUCTION MANUAL
MULHOLLAND POSITIONING SYSTEMS
