User's Manual

12. Delete all Users
Press[
*
]
Enter [Master PIN
Code] [OK] or
swipengerover
ngerprintscanner
13. Add Time Schedule
1 2
Press [OK] Use[8
▼
]or[2
▲
]
toselect:
[ADD SCHED]
[OK]
3 4
Press1-7tochoose
aday.
Example:1for
Sunday
Use[8
▼
]or[2
▲
]
toselectauser
[OK]
5 6
EnterSTARTme
[OK]
EnterENDme
[OK]
7
Press [OK] forYES or
[
*
] forNO
Twoconrmaonbeepsemied.
GreenLEDilluminates.
Use[8
▼
]or[2
▲
]to
changescheduleday
[OK]
Use[8
▼
]or[2
▲
]
tochangetheSTART
hoursetting.
Use[6 ►] tomove
toSTARTminutes.
5 6
Use[8
▼
]or[2
▲
]
tochangeSTART
minutessetting.
Use[6 ►] tomove
totheENDhour.
Use[8
▼
]or[2
▲
]
tochangeENDhour
setting.
Use[6 ►] tomove
totheENDminutes.
7 8
Use[8
▼
]or[2
▲
]to
changeENDminutes
setting.
Press [OK] forYES or
[
*
] forNO.
9 10
Use[8
▼
] or[2
▲
]
toselect:
[DEVICE] [OK]
1 2
Use[8
▼
] or[2
▲
]
toselect:
[VOLUME] [OK]
3 4
Press [OK]Use[8
▼
] or[2
▲
]
totogglebetween
HIGH,MEDIUM
orLOW.
Twobeepsemied.
GreenLED
illuminates.
16. Double Security
Aeracvangthedoublesecurityopon
usebothmethods-swipingangerprint
andinserngaPINcodetounlockthedoor.
Note:Usersetupwithonlyoneofthe
sengs(ngerprintorPINcode)willnotbe
abletounlockthedoor.
1 2
Use[8
▼
] or[2
▲
]
toselect:
[DEVICE] [OK]
Use[8
▼
] or[2
▲
]
toselect:
[2
x
Security] [OK]
3 4
Press [OK] Twobeepsemied.
GreenLEDilluminates.
Press[
*
]
Enter [Master PIN
Code] [OK] or
swipengerover
ngerprintscanner
1 2
Press [OK] Use[8
▼
]or[2
▲
]
toselect:
[DELETE ALL] [OK]
3 4
Press [OK]
Press [OK]
Twobeepsemied.
GreenLED
illuminates.
All users deleted
Notes:
1. Deneupto7dierentmeschedules
forthesameuser.
2. Press[
*
]togobackoneverymenu.
3. Press[
*
]for3secondstoexitseng
menu.
14. Edit Time Schedule
Press [OK] Use[8
▼
]or[2
▲
]
toselect:
[EDIT SCHED]
[OK]
1 2
Use[8
▼
]or[2
▲
]
totogglebetween
users [OK]
Use[8
▼
]or[2
▲
]to
choosethedesired
scheduletobeedited.
Pressingon[4◄] for
3secondsshalldelete
thespecicschedule.
3 4
15. Volume Control
Press[
*
]
Enter [Master PIN
Code] [OK] or
swipengerover
ngerprintscanner
19. Error Codes
Error
Failedtounlock
Failedtolock
Unauthorizedngerprint
UnauthorizedCode
2xSecuritymismatch
Devicefailureduringoperaon
Absentcorrectme/dateinRTC
Useroutofschedules
Code#
01
02
03
04
05
06
07
08
Press[
*
]
Enter [Master PIN
Code] [OK] or
swipengerover
ngerprintscanner
17. Edit Log
Use[8
▼
] or[2
▲
]
toselect:
[EDIT LOG] [OK]
1 2
Use[6 ►] or[4 ◄]
totogglebetween
events.
18. Delete Log
Press[
*
]
Enter [Master PIN
Code] [OK] or
swipengerover
ngerprintscanner
Use[8
▼
] or[2
▲
]
toselect:
[DELETE LOG]
[OK]
1 2
11. Delete User
Press[
*
]
Enter [Master PIN
Code] [OK] or
swipengerover
ngerprintscanner
1 2
Press [OK] Use[8
▼
] or[2
▲
]
toselect:
[DELETE USER]
[OK]
3 4
User deleted
Note: The rst Master User can't be
deleted without doing a factory reset.
Press [OK]
3
However,thereisnoguaranteethat
interferencewillnotoccurinaparcular
installaon.Ifthisequipmentdoescause
harmfulinterferencetoradioortelevision
recepon,whichcanbedeterminedby
turningtheequipmentoandon,theuseris
encouragedtotryandcorrecttheinterference
byoneormoreofthefollowingmeasures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparaonbetweenthe
equipmentandthereceiver.
•Connecttheequipmentintoanoutleton
acircuitdierentfromthattowhichthe
receiverisconnected.
•Consultthedealeroranexperiencedradio/
TVtechnicianforhelp.
Labeling Requirements (FCC 15.19)
ThisdevicecomplieswithPart15ofFCC
rules.Operaonissubjecttothefollowing
twocondions:(1)thisdevicemaynotcause
harmfulinterference,and(2)thisdevicemust
acceptanyinterferencereceived,including
interferencethatmaycauseundesired
operaon.
Modicaons (FCC 15.21)
Changesormodicaonstothisequipment
notexpresslyapprovedbyMul-T-Lock
®
may
voidtheuser’sauthoritytooperatethis
equipment.
RF Exposure info (FCC 2.1093)-for module
radio
Thisequipmenthasbeenapprovedformobile
applicaonswheretheequipmentshouldbe
usedatdistancesgreaterthan20cmfromthe
humanbody(withtheexceponofhands,
wrists,feetandankles).Operaonatdistances
lessthan20cmisstrictlyprohibited.
FOR MOBILE DEVICE USAGE (>20cm/low
power) Radiaon Exposure Statement:
ThisequipmentcomplieswithISEDradiaon
exposurelimitssetforthforanuncontrolled
environment.Thisequipmentshouldbe
installedandoperatedwithminimumdistance
20cmbetweentheradiator&yourbody.
For radio enclosure
Federal Communicaons Commission (FCC)
Statement labelling requirement for small
device statement (FCC15.19 (3))
Thisdevicecomplieswithpart15oftheFCC
Rules.Operaonissubjecttothefollowing
twocondions:(1)Thisdevicemaynotcause
harmfulinterference,and(2)thisdevicemust
acceptanyinterferencereceived,including
interferencethatmaycauseundesired
operaon.
Radio Frequency Interference (RFI) (FCC
15.105).
Thisequipmenthasbeentestedandfound
tocomplywiththelimitsforClassBdigital
devicespursuanttoPart15oftheFCCRules.
Theselimitsaredesignedtoprovide
reasonableproteconagainstharmful
interferenceinaresidenalenvironment.
Thisequipmentgenerates,uses,andcan
radiateradiofrequencyenergy,andifnot
installedandusedinaccordancewiththe
instruconmanual,maycauseharmful
interferencetoradiocommunicaons