User's Manual

ENTR Wi-Fi Bridge integration Guide
April, 24, 2017
An ASSA ABLOY Group Brand
Page
19
3.3.4 Bridge to server configuration procedure
The integrator has to enter the DNS server IP or URL address and port number (optional).
Default port number is 40003.
Press "Next" after filling both fields.
When setup is done, the bridge will try to connect to the server. Make sure the server is up and
running.
After the configuration is done and you get the "setup process finished successfully" screen you
should press NEXT> and just than the bridge will exist configuration mode and enter to working
mode.