User's Manual

ENTR Wi-Fi Bridge integration Guide
April, 24, 2017
An ASSA ABLOY Group Brand
Page
11
3.2 Powering up the Bridge
It is recommended that you first set up this Bridge somewhere close to the wireless router, and
then move this Bridge to another location for optimal Wi-Fi reception.
Insert the Bridge adaptor into the AC socket.
The bridge will start powering up and the green power led will become steady if the BIT
procedure passes successfully (picture 1).
The BLE pairing, server, IP or URL address procedures are done via the Configuration App. as
well.
Picture 1.