User's Manual

ENTR Project
Jan, 01, 2017
An ASSA ABLOY Group Brand
Page 8
Figure 3-Getkey Transaction Message structure
 Getkey 1 123456
 7401313233343536(ASCII)
After sending the GetKey command you will receive an FE(acknowledge) or FF(Non
acknowledge) response.
3.3.5 Unlock 0x7B(see table on paragraph 6)
Figure 4-Unlock Transaction Message structure
 Unlock
 7B506176656c6f636b00(ASCII)
The 506176656c6f636b00 is the lock name that you receive from the 0x72 message.
After sending the Unlock command you will receive an FE(acknowledge) or FF(Non
acknowledge) response.
The search Keys(0x71) and getKey(0x74) commands are only used for receiving a pending key
for the dongle , afterwards you can use the lock/unlock/status commands only.
3.3.6 In response you receive a 0x70 Status (see paragraph 4.2)
The status register contain the door status: Door is closed, Lock is locked, Muted,
Automatic locking, Charging and battery condition.
3.3.7 Lock 0x7A(see table on paragraph 4.2)
Dongle/UART
7401313233343536
Dongle/UART
7B506176656c6f636b00