User's Manual

ENTR Project
Jan, 01, 2017
An ASSA ABLOY Group Brand
Page 7
All data is sent as hex data printed as two 0-F textual digits. Strings can for example be
converted using https://www.branah.com/ascii-converter, by putting the textual string in the
ASCII field, selecting “Remove 0x” checkbox, and copying the values in “Hex” window.
No delimiters between values.
For example: Send a byte of 0xAB 0xF0, need to send the string "ABF0".
3.3 Examples of step by step command structure
3.3.1 First time USB insertion
When inserting the dongle in the USB port you have to wait at list 6 seconds before sending
first command (See BLE USB-Dongle Bootloader user guide for FW update feature).
3.3.2 Search Keys 0x71(see table on paragraph 4.2)
Figure 6-Search Keys Transaction Message structure
 Search Keys
 71
3.3.3 In response you receive a 0x72 Keysfound status (see paragraph 4.2)
3.3.4 Getkey 0x74(see table on paragraph 4.2)
On the Getkey command you have to insert the ID that you received on message 72 and
afterwards the key hex value that have been generate for you in your smartphone.
Dongle/UART
71