User's Manual

ENTR Project
Jan, 01, 2017
An ASSA ABLOY Group Brand
Page 6
2.1 Temperature
-10~+60C.
2.2 Voltage
+5V+5%, Low power (<100ma) USB 2.0 standard
2.3 Current Consumption
Max. 30ma@5V.
3 USB (UART COM port) Overall Description
3.1 Open a virtual command window
 Install the windows driver (32/64 bit) into the PC.
 Insert the BLE dongle into the Server/PC USB host port.
 Check that the driver recognized the dongle.
 Open a terminal (etc. putty/TeraTerm) and select the appropriate virtual COM port.
 Enable echo on.
 Set the speed to 115200bps and 8, N, 1,
 Now you can write the command as it appears in paragraph 3.3.
3.2 UART Command format
Virtual COM protocol generically implements the same protocol as in SPI between Integrator -
MCU and BLE-module MCU.
The same conceptual communication is done as in SPI, starting from the command, and
excluding the header.
Each command is finished with line-end, instead of transmitting the length in the header.