User's Manual

8
ENTR™ Dead Bolt User Manual
1.5 Magnet ng
• Carefullyconnectdatacableplug.
• Assembleelectricalunitpanel(baeryhousing).aachetobase
plate(1)andpushdown(2).
• Tightenelectricalunitpanelscrew.
Electricalunit
Datacableplug
1
Panelscrew
2
MagnetFing:
• Posionthemagnetontheframe.
moldings,ascloseaspossibletothe
lock.
•
Thetoppointofthemagnetshouldbe
Alignwiththelowerpointoftheslider
(seeillustraon).
Note:Themagnetareaonframemolding
shouldbecleanandfreefromdust,
peelingpaintetc.Usealcoholifrequired.
Waitunlcompletelydrypriortoscking.
Frame
molding
Magnet
Slider