User guide

877-2-MUELLER
F-2
PEAK SHEET RIDGE INSTALLATION
Peak sheet ridge panels are to be installed as each side of the roof is sheeted. This will aid in
keeping both sides of the roof aligned. After having installed a run of panels on each side of the
roof, apply sealant to the panels as shown. Set die formed ridge panel in place and install lap and
purlin fasteners. Apply sealant tape along the top of the leading rib to prepare for the next sidelap.
Ridge
Purlins
See Building
Erection
Drawings for
Dimension
Sealant
Tape
Roof
Fasteners
Die Formed
Ridge
NOTE: Do not walk on unsecured ends of panels.