877-2-MUELLER www.MuellerInc.
Generic EndWall: See construction drawings for all clip placement.
Inside View (4) 1/2" x 1 1/2" A325 Bolts Required With (2) MC-5 Base Clips (1A) Corner Column Base
(4) 1/2" x 1" A307 Flat Head Bolts Required With (1) MC-5 Base Clip INSIDE VIEW (2B) Door Jamb Base
(4) 1/2" x 1" A307 Bolts Required Corner Column to Rafter Then Rafter to Eave Strut (3C) (2) 1/2" x 1 1/2" A325 Bolts Required
(4) 1/2" x 1 1/2" A325 Bolts With (1) MC-7 Plate Required Note: In some instances the MC-9 plate will be used due to a center column (6) 1/2" x 1" A307 Bolts With MC-6 Plate Required (4D) Peak Connection
(6) 1/2" x 1" A307 Bolts With MC-6 Plate Required Note: In some instances the MC-6 clip will not be used due to a conflict with the door jamb or interior column (2) 1/2" x 1 1/2" A325 Bolts Required (5E) Door Jamb to Rafter
(6) 1/2" x 1" A307 Bolts With MC-6 Plate Required Note: In some instances the MC-6 clip will not be used due to a conflict with the door jamb or interior column (6F) Purlin to Rafter
BACK VIEW (2) 1/2" x 1 1/4" A307 Bolts With (2) MC-1 Clips (4) 1/2" x 1" A307 Bolts (7G) SideWall & EndWall Girts to Corner Column Connection
(2) 1/2" x 1" A307 Bolts With MC-1 Clip Required UNDERSIDE (2) 1/2" x 1" A307 Flat Head Bolts Required (8H) Door Header to Door Jamb
(2) 1/2" x 1" A307 Flat Head Bolts With MC-1 Clip Required BACK VIEW (2) 1/2" x 1" A307 Bolts Required (9I) Endwall Girt to Door Jamb
