User Manual

MINODE–WATER4 Installation Manual
Mueller Systems – Proprietary Page 6
MINODE-WATER4
Red
Green/White
Black
Translator Register
Red
Green/White
Black
Badger ADE Register
Red
Green
Black
Sensus ECR and ICE Registers
Red
Green
Black
Neptune PRORead, AUTORead, E-Coder Registers
Black
Red
Green
Table 1. MI.NODE - WATER Meter Interconnect
3.4 Verification
Following installation the Mi.Tech Hand-held should be used to verify proper installation and
operation. Please refer to the Mi.Tech manual.
4. Maintenance
There are no user serviceable items within a MINODE-WATER4. The battery is sealed within
the module and is not replaceable. No cleaning is required.
5. Product Labeling
5.1 Product and FCC/IC Identification
This label is affixed to the face of the MINODE-WATER4 unit. This allows the installer to
easily scan the label with the Mi.Tech hand-held during the installation process. This label
includes the Date of Manufacture, the Hardware Version and the MI.NODE–WATER4 /Serial
Number (Node ID) that is used to uniquely address the device and Assembled in USA.
Figure 1. Product Identification Label
5.2 IC INFORMATION
This AMI transmitter, model MINODE-WATER4, operates in the license exempt 902 MHz to
928 MHz ISM band and is certified for operation in Canada. The IC ID is 9235A-MINODE4.
Information pertaining to the certification can be found on the web at
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/home.