User's Manual

MI.NODE - WATER Installation Manual
Rev 0.2 Mueller Systems – Confidential Page 3
3. Orientation of the device vertically is required to maximize RF performance.
3.3 Wiring
Tools Required: 3M-2Y connectors, splitting tube, and a 3M Crimping Tool
MI.NODE - WATER Red
Green/White Black
Translator Register Red Green/White Black
Badger ADE Register Red Green Black
Sensus ECR and ICE Registers Red Green Black
Neptune PRORead, AUTORead, E-Coder Registers Black Red Green
Table 1. MI.NODE - WATER Meter Interconnect
3.4 Verification
Following installation the Mi.Tech Hand-held should be used to verify proper installation and
operation. Please refer to the Mi.Tech manual.
4. Maintenance
There are no user serviceable items within a MI.NODE - WATER. The battery is sealed within
the module and is not replaceable.
No cleaning is required.
5. Product Labeling
5.1 Product Identification
This label is affixed to the face of the MI.NODE – WATER unit. This allows the installer to
easily scan the label with the Mi.Tech hand-held during the installation process. This label
includes the Date of Manufacture, the Hardware Version and the MI.NODE–WATER /Serial
Number (Node ID) that is used to uniquely address the device and Assembled in Mexico.
Figure 1. Product Identification Label