Mueller Systems LGSB Installation Manual PN 880-0078-001 Rev A00
LGSB Install Manual Document Information Title: Version: LGSB Installation Manual A00 Created: 11/1/11 Last Modified On: 11/2/11 Author: Technical Lead: Contributors: Revision History Version Date Author Comments 0.
LGSB Install Manual Table of Contents 1. 2. 3. 4. 4.1 4.2 Introduction .............................................................................................. 1 Supported Products ................................................................................... 1 Maintenance .............................................................................................. 1 Product Labeling ........................................................................................
LGSB Install Manual FCC Information Changes or modifications not expressly approved by Mueller Technologies, LLC could void the user's authority to operate the equipment. IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
LGSB Install Manual 1. Introduction The Mueller Systems LGSB SmartMeter is intended for indoor & outdoor use as an unattended automatic metering Infrastructure (AMI) & control device. The LGSB SmartMeter product consists of a Landis+Gyr Focus solid state electric meter and Mueller Systems radio. The LGSB SmartMeter is fully self-contained with no user accessible controls. The SmartMeter interrogates the ANSI C.12 register set in Focus solid-state electric meters from Landis + Gyr.
LGSB Install Manual Figure 1. Product Identification Label 4.
