User Manual

LMXR Installation Manual
Mueller Systems – Proprietary Page 5
1. Introduction
The Mueller Systems LMXR is intended for indoor and outdoor use as an unattended
Automatic Metering Infrastructure (AMI) and control device. The LMXR is fully self-
contained and battery powered device with no user accessible controls.
The LMXR’s function is to allow remote access to Mueller Systems RF enabled AMI devices
for the purpose of data collection, configuration and management.
The LMXR module can only be installed in Mueller Systems equipment and is not available
for sale as a separate product.
The contents of this installation manual are intended for technically qualified personnel who
have been trained and are technically qualified in the installation of this device.
2. Maintenance
There are no user serviceable items within the LMXR product. No cleaning is required.
3. Product Labeling
3.1 FCC/IC Identification Label
This label is affixed to the LMXR unit.
Figure 1. Product Identification Label
3.2 Product Identification
This label is affixed to the side of any enclosure that contains the LMXR module.
4. Antennas
Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
• Antenna 1: Dipole, 6dBi gain
• Antenna 2: Printed Inverted F, 4.8dBi gain
• Antenna 3: 1/2λ Monopole, 2.5dBi gain
• Antenna 4: Whip, 5.0dBi gain