Specification

1. Cut and fold back
plastic cover to reveal the
copper tube
2. Install solder ttings
in accordance with
manufacturer’s instruc-
tions and local codes
Note: If using a blowtorch, take
care to keep the ame away from
the plastic cover
3. When the joint is
complete and cool, replace
the plastic coat and wrap
the joint to give continuity
of protection
Note: Polyken #930 Tape Coating
for Joints & Fittings or comparable
alternative is recommended to
wrap the joint.
Type K Type L ACR Ref Coils
Nom. Size
O.D. Size Lengths Coils Lengths Coils Lengths Coils
1/4” 3/8” – 60, 100 ft – 60, 100 ft – 50, 100 ft
3/8” 1/2” – 60, 100 ft – 60, 100 ft – 50, 100 ft
1/2” 5/8” 10, 20 ft 60, 100 ft 10, 20 ft 60, 100 ft 20 ft 50, 100 ft
5/8” 3/4” 10, 20 ft 60, 100 ft 10, 20 ft 60, 100 ft 20 ft 50, 100 ft
3/4” 7/8” 10, 20 ft 60, 100 ft 10, 20 ft 60, 100 ft 20 ft 50, 100 ft
1” 1-1/8” 10, 20 ft 60, 100 ft 10, 20 ft 60, 100 ft 20 ft 50, 100 ft
1-1/4” 1-3/8” 10, 20 ft – 10, 20 ft – 20 ft 50, 100 ft
1-1/2” 1-5/8” 10, 20 ft – 10, 20 ft – 20 ft 50, 100 ft
2” 2-1/8” 10, 20 ft – 10, 20 ft – 20 ft 50, 100 ft
Installation
*Refrigeration coils available in 250 FT upon request. Items shown in blue are O.D. sizes
Specications
• Polyethylene coating made from low density
LDPE resin, is extruded at 0.025” minimum
wall and contains UV inhibitors
• Copper water tube (Types K & L) is
manufactured to meet the chemical and
mechanical properties of the applicable
ASTM B88 and ANSI/NSF 61 standards
• ACR and Refrigeration Service Coils are
manufactured to meet the chemical and
mechanical properties of the applicable
ASTM B280 standard
• OilShield meets NFPA 31 Standard for the
Installation of Oil-Burning Equipment and is
grooved to enhance leak detection
• GasShield meets NFPA 54 National Fuel
Gas Code
Grooved for
enhanced leak
protection.
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com • MLT-100
PLASTIC COATED TUBE