User Manual
5/9/2018 setup — Mu Design
https://mu-design.lu/setup 2/3
8. Ulo will create a Wi-Fi network (AP mode), please connect your computer to this network (if a password is needed,
please use Mu Design)
9. In your web-browser go to this address: http://setup.ulo.camera or 192.168.43.1
10. Follow the instruction on Ulo webpage
11. After WiFi configuration, Ulo will connect to your home network. The Ulo webpage won't be accessible anymore. This is
normal, you should have a blank page.
12. Connect your computer to your Wi-Fi network
Access Ulo from your computer
Now you need to know your Ulo IP address.
There are 2 possibilities:
Scan your Wi-Fi network with a third party software. Look for your Ulo MAC address and enter its IP address in a web-
browser to finish configuration and start using your Ulo.
Easy but not recommended, Ulo IP address will change with time. You'll have to repeat this step each time you can't access your
Ulo.
Go to your Wi-Fi router administration page. Provide a static IP to your Ulo MAC address. Enter this IP address in a
web-browserto finish configuration and start using your Ulo.
You can find lots of tutorials on internet for this step. Example : search "static IP [name of your router]"
Recommended, your Ulo IP won't change (unless you reset your router).
Ulo is displaying a charger symbol