User Manual

5/9/2018 setup — Mu Design
https://mu-design.lu/setup 1/3
iOS & Android first setup
1. Plug Ulo to its USB cable to make sure the owl is powered (please use a 5V-2AUSD adapter)
2. Make sure your connection works properly and Ulo is placed within range of your Wi-Fi router
3. Download ULO app on App Store or Play Store on your device
4. Enable Wi-Fi and Bluetooth on your device
5. Make sure your device is connected to your Wi-Fi network
6. Launch ULO app
7. Tap Setup new Ulo
8. Tap on the Ulo discovered to configure it
9. Follow the instruction on Ulo app
(In WiFi configuration:
SSID = Name of your home WiFi network
Password = Password of your home WiFi network)
Web-browser first setup
1. Open your Ulo (see Quick Start Guide)
2. Take a picture or write down your Ulo MAC address
3. Now you can close your Ulo
4. Plug Ulo to its USB cable to make sure the owl is powered (please use a 5V-2AUSD adapter)
5. Make sure your connection works properly and Ulo is placed within range of your Wi-Fi router
6. Enable Wi-Fi on your device (laptop, smartphone, tablet, etc.)
7. Place Ulo upside-down

Summary of content (3 pages)