Owner's Manual

MTX.COM

Step 14 - Route the subwoofer cable to the desired connection point. Note: If installing as part of a kit,

the subwoofer plug will connect to the main harness supplied. If not installing as part of a kit, the plug

will need to be removed and additional speaker wire added.

Step 15 - With your wire routed and system tested, reinstall the seat in the reverse order as removed.

Note: In the event of oor pan rattle, included in the subwoofer kit are a self-tapping drill bit and bolts

to allow you to bolt the oor pan directly to the frame of the vehicle. Please refer to the installation

videos for more information on their use at www.youtube.com/user/MTXAudioUSA

Step 16 - Reassemble and go ride.