Owner's Manual

MTX.COM
11
Step 10 - Loosen the topmost hose clamp securing the fender assembly to the ller tube and slide the
clamp down out of the way.
Step 11 - Lift up on the hood trim piece and pull the fender up and away from the vehicle to remove
it. Once removed, set aside. Note: Once removed, cover or stuff a clean rag into the ller tube to
prevent gas fumes from escaping.
Step 12 - Starting with the removed driver’s interior panel, locate and align the driver side template
supplied with the speakers as shown. Note: Templates and mounting plates are marked relative to
the side of the vehicle they are for. Ensure you pay attention to and use the appropriate parts for
installation for proper tment.