User Manual

MTX.COM
8
B)ForusewithA/Vpreampsandreceiversthathaveasubwooferlineleveloutput.
If your preamplier or receiver has a dual “subwoofer” output or “LFE” output, connect a shielded
RCA cable from the preamplier output to both the left and right low level inputs on the subwoofer. If
the amplier has a single “subwoofer” output or “LFE” output, connect a shielded RCA cable from the
preamplier output to either one of the subwoofer line level inputs. Refer to Figure E.
Caution:
To reduce the risk
of fire, replace with
only the same type
and rating fuse.
Fuse Type
T3AL / 250V
AC Voltage Selector
230V
115 V
On
Off
~115V - 230V 60Hz / 50Hz
150 Watts
In Out
L
High Level
Low Input
Auto
On Off
R
L
R
In Out
Phase
Power
Volume
Min Max 60Hz 180Hz
Crossover
0° 180°
Powered Subwoofer
WARNING: To reduce the risk of fire
or electrical shock, do not expose this
appliance to rain or moisture.
ATTENTION / CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Caution:
To reduce the risk
of fire, replace with
only the same type
and rating fuse.
Fuse Type
T3AL / 250V
AC Voltage Selector
230V
115 V
On
Off
~115V - 230V 60Hz / 50Hz
150 Watts
In Out
L
High Level
Low Input
Auto
On Off
R
L
R
In Out
Phase
Power
Volume
Min Max 60Hz 180Hz
Crossover
0° 180°
Powered Subwoofer
WARNING: To reduce the risk of fire
or electrical shock, do not expose this
appliance to rain or moisture.
ATTENTION / CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Amp Output (Low Level)
Ampliers