Owner's Manual

Step
14
- Hold the enclosure
up
and align the glove box
screw
holes with the vehicle frame mount.
Replace the
two
(2)
10mm
hex bolts and tighten the enclosure
in
place.
It
may help
to place a
supporting object under the enclosure so both hands are free to line
up
the
screw
holes with the
vehicle frame mount.
Step
15
- There are three mounting holes
on
the bottom
of
the enclosure to
screw
the base of
the enclosure into place. The furthest hole
to
the right uses the included
1"
screw
. The other
two
mounting holes use the 1.5"
screws. Tighten the screws down, but take care to not strip them. These
screws lock into the plastic foot board.
MTX . COM
9