Owner's Manual

Step 6- Place the left and right pods in their perspective locations. Wiring will be orientated
toward the center of the machine. The left pod is slightly larger than the right pod. Run the wire
through the small opening between the body panel and the roll cage. Make sure to not pinch or
damage the wire. The wire can be reached from the inside of the body panel through the dash cover
opening.
Step
7- Connect the wires to your amplifier ensuring correct polarity positive-to-positive(+/+) and
negative-to-negative(-/-). The wires included use a male and female bullet connector
for a quick and
solid connection. Use corresponding bullet connectors
for the best connect ion. Test to make sure the
amplifier connections are solid before bolting
the enclosures on to the vehicle.
MTX.COM 5