Owner's Manual

Table Of Contents

MTX.COM

INSTALLATION

Mounting (Using Optional Vehicle Specic Dash Mount Kit - Sold Separately)

Theunitwillbemountedtoeachvehicledifferently.Makesuretofollowingthevehiclespecic

directions that were included with the dash kit.

• Slide the two included speed clips onto the rear of the dash kit.

• The dash kit may include additional space to mount rocker panel switches for accessories. On

the rear of the dash kit, grooves will be provided to give proper location and size for mounting

additional switches.

• Before mounting the source unit to the dash kit, make sure that the trim bezel that is included with

the source unit is NOT attached. If it is attached, it will need to be removed. It will NOT be used.

• Attach the source unit to the rear of the dash kit using the included nuts.

Speed Clips

Dash Kit

Mounting Screws

Nuts

Source Unit