Congratulations and thank you for purchasing the MTX Audio RZR-14-THUNDER5 audio system designed tor the Polaris® RZR®. Our audio system will deliver ground pounding audio making you the party vehicle in any ride! With a few basic hand tools in your trusty toolbox, you can have this installed in no time.
IN THE BOX ■ AWMC3 Bluetooth Media Controller MUDRZRDK AWMC3 Dash Kit MUDLEDC RG B Remote Control RZR-14-FS Front Speaker Kit MUD65PL Rear Cage Speaker Pods MUD100.
1/EHICLE LAYOUT li1 RZR-14-CORE Amp Brackets Compatible with 2019+ models with new dash style RZR-14-CORE Amp Bracket Compatible with 2014 - 2018 models and 2019 models with old dash style WE'RE HERE TO HELP We're here to help with any installation or technical support. Visit mtx.com to chat, call 1-800-225-5689 to speak with an MTX Technical Support representative, or visit youtube.com/user/MTXAudioUSA to view product videos.
THANKS AGAIN! Once you're done putting your new MTX Aud io RZR-14-THUNDER5 audio system to the test, and making all your friends jealous, be sure to find us online and let us know what you think. Leave a product review on the website, and connect with us over social media. Let's Get Social mtx.com mrJ11C Like, Follow, & Subscribe © 2020 MiTek Corporation . All rights reserved MTX is a trademark of MiTek Corporation. All other trademarks are property of their respective owners .
MTX Audio MUD100.4 Silk Screen MTX004754 RevD 4/15 AW0015088 Black Prints White Red Prints PMS485C MUD100.4 10 0 WAT T S x 4 RMS 4 CH A NNEL A MPL IF IER OWNER’S MANUAL MUD100.4 AMPLIFIER Use your smartphone to scan and learn more about all of the all-weather solutions available from MTX Audio. MTX.
PRODUCT INFORMATION Model # Serial # Dealer’s Name Date of Purchase INTRODUCTION Thank you for purchasing this MTX Audio Hi-Performance amplifier. Proper installation matched with MTX speakers and subwoofers provide superior sound and performance for endless hours of enjoyment whether you are waking the neighbors or just out enjoying your tunes.
PANEL LAYOUT 1 SPE AKER OUTPUT INPUT FRONT WHITE: L+ WHT/ BLK: L– GREY: R+ GREY/ BLK: R– INPUT FRONT WHITE: L+ BRIDGE+ RED: 12V+ WHT/ BLK: L– BLUE: REMOTE GREY: R+ BL ACK: GND GREY/ BLK: R– BRIDGE– SPE AKER OUTPUT RE AR FRONT GREEN: WHITE: L+ L+ GRN/ WHT/BLK: BLK: L– L– VIOLET: GREY: R+ R+ VLT/ BLK: GREY/ BLK: R– R– RE AR FRONT GREEN: WHITE: L+ BRIDGE+ GRN/ BLK: L– RED: 12V+ WHT/ VIOLET: BLUE: REMOTE GREY: R+ VLT/ BLK: R– BRIDGE– BL ACK: GND GREY/ RE AR GREEN: L+ GRN/ BLK: L– VIOLET: R+ VLT/ BLK: R–
WIRING DIAGRAM See page 22 for amplifier wiring diagrams. INSTALLATION AND MOUNTING MTX recommends your new Thunder Sports™ amplifier be installed by a 12 volt installation specialist. Any deviation from specified installation instructions can cause serious damage to the amplifier, speakers and/or vehicle’s electrical system. Damage caused from improper installation is NOT covered under warranty. Please verify all connections prior to system turn on. 1. Disconnect the vehicle’s negative battery cable. 2.
INSTALLATION For proper performance and safety, MTX recommends installing an inline fuse per the owner’s manual instructions according to the following. MUD100.
SPECIFICATIONS Model MUD100.4 Description 50 W RMS/CH Stereo RMS Power at 14.4V 4Ω Bridged Load 200 W RMS 2Ω Load 100 W RMS 4Ω Load 50 W RMS Features Input Level 0.2 - 5V Low Level, 0.4 - 10V High Level Frequency Response 10Hz - 32 kHz Low Pass Filter (LPF) Rear Only 80Hz Fixed High Pass Filter (HPF) Rear 80Hz Fixed High Pass Filter (HPF) Front Selectable 80/200Hz THD at 4Ω , 1W <0.2% Signal-to-Noise Ratio >75dB Minimum Load 2Ω Low Voltage Protection Yes, Protect <8.
WIRING DIAGRAM 4Ω Stereo Signal Signal Remote Signal FUSE Source Unit 12V 4-Ohm 4-Ohm 4-Ohm 4-Ohm 22 MTX.
WIRING DIAGRAM 2Ω Stereo Signal Signal Remote Signal FUSE Source Unit 12V MTX.
WIRING DIAGRAM Stereo 4Ω Front/4Ω Bridged Rear Signal Signal Remote Signal FUSE Source Unit 12V 4-Ohm 4-Ohm 4-Ohm 24 MTX.
WIRING DIAGRAM 4Ω Bridged Subwoofers Signal Signal Remote Signal FUSE Source Unit 12V 4-Ohm 4-Ohm MTX.
© 2015 Mitek Corporation. All rights reserved. MTX is a trademark of Mitek Corporation. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice. MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. MTX005172 RevA 4/15 • 21A10394 • AW0015062 MTX.
BLUETOOTH 11:00PM Song Title Artist Album 23/25 3:08 MUTE MENU SOURCE AWMC3 ALL-WEATHER MEDIA CONTROLLER WITH 3" DISPLAY OWNER’S MANUAL MTX.
IMPORTANT NOTICE If you have any questions regarding wire routing in a vehicle, please contact MTX Technical Support at 1-800-225-5689. When connecting power and ground wires ensure that the red power wire is fused at the point where it is connected to the vehicle’s battery. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the product.
WIRE CONNECTION 20A Power / Speaker Connector 3 6 9 12 2 5 8 11 1 4 7 10 SXM (SiriusXM Connect Tuner Sold Separately) Black AUX In Grey Line Out (Front) Brown Line Out (Rear) Antenna DIN USB POWER AND SPEAKER CONNECTION 20A 3 6 9 12 wer / Speaker Connector SXMWire Color Pin # 5 4 9 8 White / Black White Green / Black Green Front Left Speaker (-) Front Left Speaker (+) Rear Left Speaker (-) Rear Left Speaker (+) Grey / Black Purple Purple / Black Front Right Speaker (+) Front Right Speaker
INSTALLATION Mounting (Using Mounting Plate) To mount the unit, find a flat surface with adequate clearance behind it that provides enough room for the unit and all it’s necessary wiring. • Once a mounting location has been determined, cut a circular hole 3" (77mm) in diameter. • After the hole is cut, slide the unit and wiring through the hole. A piece of self adhesive EVA foam is supplied in order to create a water resistant seal. This may be placed on the back side of the unit if desired.
INSTALLATION Mounting (Using Optional Vehicle Specific Dash Mount Kit - Sold Separately) The unit will be mounted to each vehicle differently. Make sure to following the vehicle specific directions that were included with the dash kit. • Slide the two included speed clips onto the rear of the dash kit. • The dash kit may include additional space to mount rocker panel switches for accessories.
CONTROLS 7 8 BLUETOOTH 11:00PM Song Title Artist Album 23/25 3:08 6 BLUETOOTH 6 11:00PM MUTE Song Title Artist Album MENU SOURCE 23/25 3:08 4 MUTE SOURCE 3 2 1 5 MENU 1. Power Button ( ) - This push button (On / Off) supplies power to the head unit. 2. Volume / Function Control Knob - Rotate knob to set values and control volume. Press and hold knob for 3 seconds to access EQ menu and confirm function values. 3. Source Button - This push button switches between audio sources.
MUTE GENERAL OPERATIONS MENU MUTE MENU Switching On and Off SOURCE Press Power Button ( ) to turn the deviceSOURCE On. Hold Power Button ( ) to turn the device Off. Operating Mode Press Source Button to switch between radio reception (AM / FM / WB / SXM), audio input (AUX), USB and Bluetooth® audio streaming (BT MUSIC). Rotate the VOL knob to change selections and press VOL knob to enter operating mode. Volume Rotate VOL knob to set the volume. Sound Settings Hold VOL knob for 3 seconds to enter EQ.
RADIO FUNCTIONS Selecting Radio Band • Press Source Button and rotate VOL knob. • Press VOL knob to select radio band. • Select FM or AM band. BLUETOOTH Song Title Artist BLUETOOTH Album Song Title Artist Album 23/25 3:08 23/25 11:00PM BLUETOOTH Song Title Artist 11:00PM BLUETOOTH Album Song Title 23/25 Artist Album 11:00PM 11:00PM 3:08 23/25 Automatic or Manual Search Frequencies 3:08 3:08 • Press and hold the Previous / Next Buttons ( / ) to start automatic station search.
RADIO FUNCTIONS Local • Press Menu Button to enter FM Settings. • Press VOL knob and rotate to select Local. • Press VOL knob and rotate to select Local ON / OFF. Note: Only stations with good reception quality will be played under the Local setting. Select USA / Europe Area Frequencies • Press Menu Button to enter FM Settings. • Press VOL knob and rotate to select Radio Region. • Press VOL knob and rotate to select USA / Europe Frequencies.
SiriusXM® OPERATION BLUETOOTH 11:00PM BLUETOOTH 11:00PM Selecting SiriusXM Song Title Song Title • Press the Source ArtistButton and rotate ArtistVOL knob. Album Album • Press VOL knob to select SXM mode. 23/25 23/25 Note: If there is no SiriusXM® Tuner connected this mode will be skipped. Please connect your BLUETOOTH 11:00PM BLUETOOTH 11:00PM to the SiriusXM® port located at the back of the unit.
SiriusXM® OPERATION Parental Control SiriusXM® channels can be locked, and will need a pass code to access. The default code is “5220”. If the pass code is forgotten, simply run the SXM Factory Default to reset the pass code. GUIDE ON HOW TO ENTER THE CODE USING THE VOLUME BUTTON: When the first character is flashing, turn the rotary knob to select number 5 and press to enter. When the second character flashes, use the same operation to select the rest of the characters “2”,”2”,”0”.
SiriusXM® OPERATION Troubleshooting (cont) Subscription Updated The radio has detected a change in your SiriusXM® subscription status. Press any button to clear the message. In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription. In Canada, visit www.siriusxm.ca or call 1-877-438-9677 if you have questions about your subscription.
BLUETOOTH® AUDIO STREAMING This unit supports Bluetooth® for wireless music streaming from Bluetooth® enabled devices including most iPhone® and Android® smartphones and tablets. 1. Turn on the Bluetooth® feature of the mobile device. Scan for available Bluetooth® devices within range. Select “MTX-MC3” . (Please refer to the mobile device’s instruction manual for Bluetooth® Pairing). 2. After successfully pairing, connect the mobile device to the AWMC3 via Bluetooth®.
SPECIFICATIONS Tuner FM Frequency Range 87.5 - 107.9 MHz (America) 87.5 - 108 MHz (Europe) Channel Step 200 kHz (America) 50 kHz (Europe) Sensitivity 2.8 μV Stereo Separation 30dB Signal to Noise Ratio 50dB Tuner AM Frequency Range Usable Sensitivity 530 - 1710 KHz (America) 522 - 1620 KHz (Europe) 32dB Tuner WB Frequency Range 162.4 - 162.55 MHz Line-Out Output 2V Impedance 10k Ohm General Power Supply 12V DC (10.8-15.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MUD65PL CAGE MOUNT SPEAKER WITH RGB LEDS OWNER’S MANUAL MTX.
PRODUCT INFORMATION Model # Serial # Dealer’s Name Date of Purchase IN THE BOX • Speaker and Enclosure • Brackets • For mounting the bracket base to the enclosure • (8) M6-1.0x14mm stainless steel Hex Bolt • (8) M6 flat washer stainless steel • (8) M6 split lock washer stainless steel • For tightening the bracket strap to the base • (2) M6-1.0x50mm stainless steel Hex Bolt • (2) M6 serrated flange lock nut stainless steel INTRODUCTION Thank you for purchasing this MTX Audio cage mount speaker pod.
INSTALLATION 1. Choose appropriate bracket clamp, 1.5", 1.75", and 2", for the application. If using the MUD65P with a ProFit or Profile style enclosure, use optional bracket MUDPFC, to attach speaker enclosure to cage. 2. Attach bracket base to enclosure at desired angle using a minimum of two (2) M6-1.0x14mm Hex bolts and M6 lock washers. If only two (2) bolts are used, ensure there is a bolt on each side of the round base for secure mounting. 3.
Figure 2 +12V 2A Fuse (max) (sold separately) <7" (17.5cm) +12V RGB Ground – Color Combinations: Splice and combine the ground wires to yeild a different color. 4 Red Red Green Green Blue Blue Red / Green Lime Green Red / Blue Magenta Green / Blue Aquamarine Red / Green / Blue Blue-White MTX.
The bracket base can rotate in any direction desired, a minimum of 2 bolts must be used, 1 on each side. MTX.
© 2018 Mitek Corporation. All rights reserved. MTX, Mud Nation, and Let’s Do Something Dirty are trademarks of Mitek Corporation. All other trademarks are property of their respective owners. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice. MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689 MTX005835 RevA 9/18 •21A10686 • AW0015692 8 MTX.
MODE SPEED DEMO SPEED MODE MUDLEDC MUDLEDC LED REMOTE CONTROL OWNER’S MANUAL MTX.
PRODUCT INFORMATION Model # Serial # Dealer’s Name Date of Purchase IN THE BOX • Remote Control • RF Receiver INTRODUCTION Thank you for purchasing the MUDLEDC LED remote control. This remote expands the functionality of RGB LED equipped components like the MUD65PL. Up to 12 speakers can be connected to the MUDLEDC in parallel. For additional speakers, additional remotes will be required.
GENERAL OPERATION 1. Power / Standby - Power on or switch to standby mode. 2. Speed Down - Press to decrease speed of flash. 3. Speed Up - Press to increase speed of flash. 4. Static Color - Cycle through static colors. 5. Static Color - Cycle through static colors. 6. Adjust Dynamic Mode - Cycle through dynamic modes. 7. Adjust Dynamic Mode - Cycle through dynamic modes. 8. Brightness Up - Press to increase brightness. 9. Brightness Down - Press to decrease brightness. 10.
© 2018 Mitek Corporation. All rights reserved. MTX, Mud Nation, and Let’s Do Something Dirty are trademarks of Mitek Corporation. All other trademarks are property of their respective owners. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice. MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689 MTX005868 RevA 10/18 •21A10687 • AW0015693 4 MTX.
*Optional EBC MUD600-1 MONO BLOCK AMPLIFIER OWNER’S MANUAL MTX.
PRODUCT INFORMATION Model # Serial # Dealer’s Name Date of Purchase INTRODUCTION Thank you for purchasing this MTX Audio Hi-Performance amplifier. Proper installation matched with MTX speakers and subwoofers provide superior sound and performance for endless hours of enjoyment whether you are waking the neighbors or just out enjoying your tunes.
CONTROL FUNCTIONS 1. Wiring Harness - All wiring to the amplifier will run through the wiring harnesses. Speakers - Connect subwoofers to these terminals. Be sure to check wire for proper polarity. Never connect the speaker cables to the chassis ground. +BATT (+12 Volt Power) - Connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal of the vehicle battery or the positive terminal of an isolated audio system battery.
INSTALLATION AND MOUNTING MTX recommends your new amplifier be installed by a 12 volt installation specialist. Any deviation from specified installation instructions can cause serious damage to the amplifier, speakers and/ or vehicle’s electrical system. Damage caused from improper installation is NOT covered under warranty. Please verify all connections prior to system turn on. 1. Disconnect the vehicle’s negative battery cable. 2. Determine the mounting place for your MTX amplifier.
INSTALLATION For proper performance and safety, MTX recommends installing an inline fuse per the owner’s manual instructions according to the following.
SPECIFICATIONS Model MUD600-1 Description Class D Mono Amplifier Primary Ratings* Primary Power 300 W RMS at 4Ω, 20-165Hz and ≤ 1% THD+N* Signal-to-Noise Ratio 85 dBA Secondary Ratings* 425 W at 4Ω, ≤ 1% THD+N 650 W at 2Ω, ≤ 1% THD+N Dynamic Power Features Input Level 0.2 - 5V Low Level, 0.4 - 10V High Level Frequency Response 10Hz - 250 Hz Low Pass Filter (LPF) 40-250Hz Variable Minimum Load 2Ω Low Voltage Protection Yes, Protect <8.
WIRING DIAGRAM 4Ω MONO 22 MTX.
WIRING DIAGRAM 2Ω MONO MTX.
© 2019 Mitek Corporation. All rights reserved. MTX, Mud Nation, and Let’s Do Something Dirty are trademarks of Mitek Corporation. All other trademarks are property of their respective owners. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice. MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689 MTX005930 RevA 2/19 • 21A10713 • AW0015728 MTX.
RZR-14-SW POLARIS RZR SUBWOOFER ENCLOSURE OWNER’S MANUAL ® MTX.
THANK YOU Congratulations and thank you for purchasing the MTX Audio direct-fit subwoofer enclosure designed for the Polaris® RZR®. Our sub enclosure, with its high output 10” subwoofer, will belt out the bass and deliver ground pounding audio making you the party vehicle in any ride! With a few basic hand tools in your trusty toolbox, you can have this installed in no time.
FEATURES • • • • • • • Can Be Used as a Ported or Sealed Enclosure Includes an MTX 55 Series Subwoofer for its Deep Bass Reproduction Capabilities QuIPS (Quick Install Port Seal) Technology Mounts Behind Dashboard Factory Matched Texture Installer Friendly Design Direct Fit, No Cutting or Drilling Required • • • • • • • 10" Loaded Subwoofer Enclosure RMS Power Handling: 400-Watts Peak Power Handling: 800-Watts Sensitivity (2.83V/1m): 90.2dB Sensitivity (1W/1m): 83.
DISASSEMBLY - RZR MODELS 2019+ Step 1 - Release the two quick locks to remove the hood from the vehicle. Lift the hood and slide it towards the front of the vehicle Step 2 - Remove the four (4) T40 screws holding down the top dash cover. Driver Side 4 Passenger Side MTX.
Step 3 - Remove the retaining clips holding the center dash compartment in place. Remove the compartment. Step 4 - Remove the dash top panel. MTX.
Step 5 - Remove the two (2) bolts in the center behind the dash. Note: For vehicles with Ride Command units, you may find two additional bolts on either side of the display. Remove these if present. Step 6 - Remove the T-handle and clip. Step 7 - Remove the Torx head screw from the dash pocket brace. After this is removed the plastic dash pocket can be pulled out of the dash. 6 MTX.
Step 8 - Unplug the gauge and switches making sure not to damage the vehicle and ignition wiring. Make note to remember what connector is associated with each specific switch. Step 9 - Carefully lift the dash out of the vehicle. There are locking clips on the right and left side that hold it in place. The dash will pop out. If the locking clips have fallen off, place them back onto the locking tabs on the dash. These are needed to re-assemble the dashboard. MTX.
Step 10 - Remove the retaining clips holding the passenger side dash compartment in place. Remove the compartment. Step 11 - Remove the two (2) 10mm bolts above the glove box. 8 MTX.
Step 12 - Remove the glove box. Step 13 - Remove one (1) T40 Torx screw located directly above left foot rest on passenger side. The vehicle disassembly process is now complete. Please turn to page 14 to continue with the product installation process. MTX.
DISASSEMBLY - RZR MODELS 2014 - 2018 Step 1 - Release the two quick locks to remove the hood from the vehicle. Step 2 - Lift up the hood and slide towards the front of the vehicle. Step 3 - Remove the two (2) T40 screws holding down the top dash cover. 10 MTX.
Step 4 - Lift and pull back the top dash cover to release the clips holding it in place. Unplug the gauge and switches making sure not to damage the vehicle and ignition wiring. Make note to remember what connector is associated with each specific switch. Step 5 - Remove the Torx head screw from the dash pocket brace. After this is removed the plastic dash pocket and bracket can be pulled out of the dash. MTX.
Step 6 - Remove the two (2) T40 screws holding the dashboard in place. Step 7 - Pull the dashboard towards the back of the vehicle. There are locking clips on the right and left side that hold it in place. The dash will pop out. 12 MTX.
Step 8 - Carefully lift the dash out of the vehicle. If the locking clips have fallen off, place them back onto the locking tabs on the dash. These are needed to re-assemble the dashboard. Step 9 - Remove the two (2) 10mm hex bolts that are holding the glove box to the vehicle frame. When the screws are removed the glove box can be lowered down and out of the enclosure. The vehicle disassembly process is now complete. Please turn to page 14 to continue with the product installation process. MTX.
INSTALLATION Step 1 - Install the large hardware bracket on the RZR-14-SW subwoofer enclosure using one 10mm bolt as pictured. Hand-tighten so the bracket is able to slide left to right. Step 2 - Hang the subwoofer enclosure from the T-handle mounting bar as shown by sliding the installed bracket over the bar. Install five additional 10mm bolts hand-tight. Note: The second mounting bracket included is used for all 2014 - 2018 models only. 14 MTX.
Step 3 - Install the supplied Torx screw in the lower mounting hole aligning with the factory hole in the footwell and tighten. Step 4 - Tighten all remaining hardware. Step 5 - Feed wire into dash towards amplifier mounting location. Note: In the event this is not used with an MTX THUNDER SYSTEM, it will be necessary to cut off the connector and hardwire directly to your equipment. Step 6 - Reassemble and go ride. WARRANTY PERIOD At MTX Audio we engineer products that will stand up to the test of time.
Let’s Get Social mtx.com Like, Follow, & Subscribe © 2020 Mitek Corporation. All rights reserved. MTX is a trademark of Mitek Corporation. All other trademarks are property of their respective owners. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice. MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689 MTX006073 RevA 2/20 • 21A10765 • AW0015798 16 MTX.
