Owner's Manual

Place one bracket under and against enclosure as shown above. Move

enclosure out of the way, making sure bracket doesn’t move. Using (2) of the 2”

screws from the supplied hardware, secure bracket to floor. (NOTE: When

securing bracket to floor, make sure to check floor, and underside of vehicle for

wire or objects). Move enclosure back into place against the now secured

bracket and using (2) of the 1” screws from the supplied hardware secure

enclosure to bracket.

Step 2

Step 3

Step 4

Step 1

C15C07FB10

Chevy/GMC 1500/2500 Crew Cab (Unloaded)

Enclosure Volume: .99 Cubic Foot, Sealed

Place supplied gasket around woofer cutout. Connect wires (black neg. and red

pos.). Using supplied hardware, secure woofer into enclosure, making sure not

to overtighten screw to avoid stripping. Flip up driver side rear seat and place

enclosure on floor as shown above. Enclosure should be inside seat trim if the

seat is in the down position.

From passenger side place second bracket against enclosure as shown. Using

supplied hardware, secure to floor and enclosure as done in Step 2.

Make final speaker and or wire connection, fold down seat and enjoy. Your

installation is now complete.

21A9490

Due to continual product development, all specifications are subject to change without notice.