Operator`s manual

701333-004 5-21
Configuring the 1330 in ASCII Mode
421 – Operator Panel Adjust
Use Configuration Option 421 to adjust the intensity of the LCD on the Operator Panel.
The intensity ranges from light to dark.
noitpO eciohC gninaeM
124
1thgiL
2)tluafed(lamroN
3kraD
To specify your choice, follow the configuration procedure that begins on Page
5-1. Enter your choice (1, 2, or 3) and press Save.
422 – Start Mode After Eject
Configuration Option 422 enables you to set the 1330 so that it automatically goes into
ready mode when you press the Load key twice. This will also cause the paper to retract.
noitpO eciohC gninaeM
224
seYnehwedomydaerotniseogyllacitamotua0331ehT
)tluafed(eciwtyekdaoLehtsesserpresueht
oNtcejeretfaedompotSnisniamer0331ehT
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (Yes or No) and press Save.
423 – Report Intervention
Configuration Option 423 enables you to set the 1330 so that interventions are or are not
reported to the host.
noitpO eciohC gninaeM
324
seY)tluafed(tsohehtotsnoitnevretnistroper0331ehT
oNtsohehtotsnoitnevretnitropertonseod0331ehT
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (Yes or No) and press Save.